Enable sysopt settings

Enable sysopt options on the ASA to control how ACLs are applied to IPsec VPN packets and whether device values inherit from the shared system settings policy.

The crypto map ACL bound to the outgoing interface either permits or denies IPsec packets through the VPN tunnel. IPsec authenticates and deciphers packets that arrive from an IPsec tunnel, and subjects them to evaluation against the ACL associated with the tunnel.

ACLs define which IP traffic to protect. For example, you can create ACLs to protect all IP traffic between two subnets or two hosts.

Before you begin

Follow these steps to enable sysopt settings for ASA IPsec VPN traffic:

Procedure


Step 1

In the edit ASA system settings page, click Sysopt in the left pane.

Step 2

Uncheck the Retain existing values checkbox to configure the values for the shared ASA system settings policy.

Important

If the Retain existing values check box is selected, you can't configure the values as the fields are hidden. Security Cloud Control uses the existing local values of the ASA device for this setting and doesn't inherit from the shared policy.

Step 3

Enable Allow VPN traffic to bypass interface access lists to bypass ACL inspection.

Step 4

Click Save.


The sysopt settings are saved. If you enable Allow VPN traffic to bypass interface access lists, IPsec VPN packets bypass ACL inspection. If Retain existing values is unchecked, values inherit from the shared ASA system settings policy.