Configure SSH access
Enable the secure copy (SCP) server over SSH on the ASA and configure access parameters so that only authorized SSH clients can establish SCP connections and session duration aligns with operational needs.
You can enable the secure copy (SCP) server on the ASA. Only clients that are allowed to access the ASA using SSH can establish a secure copy connection.
Before you begin
Follow these steps to configure SSH access on the ASA and enable the secure copy (SCP) server:
Procedure
Step 1 | In the edit ASA settings policy page, click SSH in the left pane. | ||
Step 2 | Uncheck the Retain existing values checkbox to configure the values for the shared ASA system settings policy.
| ||
Step 3 | Enable Enable Scopy SSH (secure copy SSH). | ||
Step 4 | In the Timeout in Minutes field, set the timeout from 1 to 60 minutes. The default is 5 minutes. The default duration is too short in most cases, and should be increased until all pre-production testing and troubleshooting have been completed. | ||
Step 5 | Click
| ||
Step 6 | Click Save. |
The ASA enables the SCP server over SSH with the specified timeout and access controls saved. Only the configured hosts and networks can establish SCP connections based on the selected interface, IP version, and addressing.
and configure these settings: