Enable the ASA physical interface
Enable a selected physical interface on an ASA device so that it becomes operational and can forward traffic.
Use this task when an ASA interface is administratively disabled and you need to activate it through the user interface and commit the change to the device configuration.
Before you begin
Follow these steps to enable the ASA physical interface:
Procedure
Step 1 | Select the physical interface you want to enable. |
Step 2 | Move the State slider at the top right of the window associated with the interface's logical name. |
Step 3 | Review and deploy the changes you made. |
The selected ASA physical interface is enabled, and the deployed configuration reflects the change.