Configure IPv4 address for an ASA physical interface
Set IPv4 addressing on an ASA physical interface using Static or DHCP, optionally configure a standby IP for high availability, and choose whether to obtain a default route from DHCP.
Perform this task in the Edit Physical Interface dialog when you need to assign IPv4 addressing to an interface.
Use the IPv4 Address tab to select Static or DHCP and apply values that match your network and high availability design.
Before you begin
Follow these steps to configure an IPv4 address for an ASA physical interface:
Procedure
Step 1 | In the Edit Physical Interface dialog box, configure these settings in the IPv4 Address tab:
|
Step 2 | Click Save if you are done. |
IPv4 addressing is applied to the interface according to your selections. If DHCP with Obtain Default Route is enabled, a default route is received from the DHCP server. You can save the configuration or proceed with additional interface configuration.
What to do next
-
Configure IPv6 addressing for ASA physical interface if you intend to assign an IPv6 address to this interface.
-
Configure Advanced ASA Physical Interface Options. The advanced settings have defaults that are appropriate for most networks. Edit them only if you are resolving network issues.
-
If you saved the interface, and you don't want to continue advanced interface options, continue to Enable the Physical Interface.