Configure an ASA physical interface
This task helps you access and edit a physical interface on an ASA device so that you can name it and continue with IPv4, IPv6, or advanced interface configuration as needed.
Use the inventory and ASA views to locate the device and open the interface editor. From there, you can assign a logical name and branch into related addressing or advanced settings tasks.
Before you begin
Follow these steps to configure an ASA physical interface:
Procedure
Step 1 | In the left pane, click . |
Step 2 | Click the ASA tab. |
Step 3 | Select the device you want to modify, and in the Management pane on the right, click Interfaces. |
Step 4 | Click a physical interface that you want to configure, and click Edit. The Editing Physical Interface dialog box appears. |
Step 5 | In the Logical Name field, enter a name for the interface. |
Step 6 | Continue with one of these procedures:
|
The selected ASA physical interface opens in the editor, the logical name is defined, and you can proceed to IPv4/IPv6 addressing, advanced options, or enable the interface using the linked tasks.