Remove ASA EtherChannel interface

Remove an EtherChannel interface from ASA using the CDO interface to decommission or adjust device configuration.

Use this procedure to remove an EtherChannel interface from ASA.

Before you begin

Follow these steps to remove an ASA EtherChannel interface:

Procedure


Step 1

In the left pane, click Security Devices.

Step 2

Click the ASA tab.

Step 3

Select the device you want to modify, and in the Management pane on the right, click Interfaces.

Step 4

On the Interfaces page, select the EtherChannel interface you want to delete.

Step 5

In the Actions pane located to the right, click Remove.

Step 6

Confirm you want to delete the EtherChannel interface and click Delete.

Step 7

Review and deploy the changes you made.


The EtherChannel interface is deleted from the ASA configuration, and the change is applied to the device after you deploy.