Remove files from ASA

Remove unneeded files from an ASA device to manage flash storage while maintaining RA VPN functionality. This task ensures AnyConnect-related files are handled safely by requiring disassociation before deletion.

You are not allowed to remove AnyConnect files associated with the RA VPN configuration. You have to disassociate the AnyConnect file from the corresponding RA VPN configuration and then remove the file from the File Management tool.

Note

If you upload a file to an ASA that is configured as a peer in a failover, Security Cloud Controldoes not acknowledge the new file for the other peer in the failover pair and the device status changes to Not Synced. You must manually deploy changes to both devices for Security Cloud Control to recognize the file in both devices.

The remove operation deletes the selected files permanently from the flash memory. A message appears when deleting files asking for confirmation.

Before you begin

Disassociate the AnyConnect file from the corresponding RA VPN configuration before removing it from the File Management tool.

Follow these steps to remove files from an ASA device:

Procedure


Step 1

In the navigation bar, click Security Devices.

Step 2

Click the Devices tab.

Step 3

Click the ASA tab and select an ASA device.

Step 4

In the Management pane on the right, click File Management.

Step 5

Select the files you want to remove, and under Actions on the right, click Remove. A maximum of 25 files can be selected. If Security Cloud Control fails to remove some files, you can see the device Workflows to determine the removed and retained files.

Step 6

If you have chosen to remove the AnyConnect package, deploy the new RA VPN configuration to the ASA device.


Selected files are permanently removed from ASA flash memory after confirmation. If some removals fail, device workflows indicate which files were removed and which were retained.