Remove a Secure Device Connector

Deleting an SDC is not reversible. After you remove it, you cannot manage the devices that were connected to that SDC until you install a new SDC and reconnect the devices. Reconnecting devices can require you to enter administrator credentials again.

Before you remove an SDC, move the connected devices to another SDC or remove them from Security Cloud Control Firewall Management.

Procedure

Step 1

Remove any devices connected to the SDC you want to delete. You can do this one of two ways:

Move some devices to different SDCs or off of an SDC entirely. See below for more information:
- Update AWS VPC Connection Credentials
- Update Meraki MX Connection Credentials
Remove from Security Cloud Control any devices connected to the SDC you want to delete.
1. See Find all Devices that Connect to Security Cloud Control Using the Same SDC to identify all the devices used by the SDC.
2. In the Security Devices page, select all the devices you identified.
3. In the Device Actions pane, click Remove and click OK to confirm your action.

Step 2

In the left pane, click Administration > Integrations > Secure Connectors.

Step 3

On the Services page with the Secure Connectors tab selected, click the blue plus button and select Secure Device Connector.

Step 4

In the Secure Connectors table, select the SDC you want to remove. Its device count should now be zero.

Step 5

In the Actions pane, click Remove. You receive this warning:

Warning

You are about to delete <sdc_name>. Deleting the SDC is not reversible. Deleting the SDC will require you to create and onboard a new SDC before you can onboard, or re-onboard, your devices.

Because you currently have onboarded devices, removing the SDC will require you to reconnect those devices and provide credentials again after setting up a new SDC.

If you have any questions or concerns, click Cancel and contact Security Cloud Control support.
If you wish to proceed, enter <sdc_name> in the text box below and click OK.

Step 6

In the confirmation dialog box, if you wish to proceed, enter your SDC's name as it is stated in the warning message.

Step 7

Click OK to confirm the SDC removal.