Edit a SASE tunnel
Modify an existing SASE tunnel on an ASA device to update identifiers, peer and LAN interfaces, addressing, and authentication, and optionally deploy the configuration immediately.
Use this procedure to modify an existing SASE tunnel:
Before you begin
Follow these steps to edit a SASE tunnel.
Procedure
Step 1 | Choose . |
Step 2 | Select the tunnel you want to modify. |
Step 3 | In the Actions pane, select Edit. |
Step 4 | Edit these fields of the SASE tunnel:
|
Step 5 | (Optional) The Deploy changes to ASA immediately toggle at the bottom of the pop-up window is enabled by default. When enabled, the SASE tunnel configuration is deployed immediately to the ASA peer selected in the tunnel configuration. To stage changes and deploy later, manually set the option to disable. If you choose to stage changes and deploy later, the status of the ASA peer in the Security Devices page appears as |
Step 6 | Select Save Updates. |
The SASE tunnel settings are updated and saved. If deployment is enabled, the configuration is pushed to the selected ASA immediately; otherwise the device status shows Deploy Pending until you deploy the staged changes.