Use the Security Cloud Control Command Line Interface

You can use the command line interface (CLI) for managing or troubleshooting devices. The commands supported with this tool depend on the type of device. For the ASA, for example, you can use the full CLI. But for the Firewall Threat Defense, command support is limited to select show commands.

You can send commands to a single device or to multiple devices simultaneously.

See the following supported device types:

• ASA

  Commands are entered directly in global configuration mode. For detailed ASA CLI documentation, see ASA Command Line Interface Documentation.

• Cisco IOS

  Commands are entered in user EXEC mode. You need to enter enable followed by configure terminal to execute them in Global Configuration mode. For Cisco IOS CLI documentation, see Networking Software (IOS & NX-OS) for your IOS version.

• SSH